Some tips about how to add toner to printers
Nowadays, ink cartridges becomes more and more important in our work, but do you know how to add toner to printers?
Old drums are different, the same toner to print out the different quality of the situation. So before filling the powder carefully check the old drum in all aspects of the situation, can only print out the ideal quality.
One. Please print the test page with the old drum. If the black spots or stains appear regularly, then the drum member problem, find out defective parts replaced after the drum apart, normally occurring case where the photosensitive drum is damaged.
Please check if your drum is damp. If the cartridge has just come out from the printer, there is no such problem. What is meant here is that the cartridge has been removed from the printer for some time, during which if you place the wall or other non-dry place, the possibility of damp is very large. Users are often easy to ignore this problem.
Then the user can be judged by the page hit detector old drum damp, if the detected page appears bottom ash, or a stick found photosensitive drum tn660 toner scratch can not afford, then this is damp the drum, the drum may be considered apart and Old, Blowing 5-10 minutes with hair dryer. If the damp situation is more serious temporarily not powder.
Three. If your old drum is the first time to fill the powder, it must be completely clean dry powder warehouse and waste toner box, if the second powder still use the same brand of toner is only clean the waste toner box can be. It is important to note that each time the powder must be cleaned.
Four. After the drum is removed, please turn the magnetic roller to see if the powder is uniform and whether it is scratched. If the powder is not even or the circle is present, it will damage the magnetic roller or inner scraper.
Five. If you buy a lot of toner, please put the temporary excess toner stored in low temperature dry place, do not want to avoid the sun and high temperature, otherwise it may be due to condensation and can not be used.
If you need purchase some printers, welcome to V4INK, here will support you good quality and best price. Please come and have a try.